
Today we will discuss a very important aspect - the disinfection of tools. This is a topic that does not tolerate carelessness and a casual attitude, as a multitude of unpleasant diseases can be transmitted through manicure tools, ranging from fungal infections to hepatitis! Naturally, such "baggage" will not please the client. Therefore, disinfection is paramount!
But how not to overdo it? How to ensure that the tools last long and do not harm the client? What pitfalls may await during disinfection?
To clarify all the details, we spoke with the wonderful expert Alena Perevalova, the head of Staleks Lab. The conversation was interesting and useful, and ultimately a brief collection of tips for all disinfection scenarios was compiled.
Basic rules:
- Avoid using chlorine-based, oxygen-based disinfectants, and those based on peracetic acid. Yes, they are very strong, but they negatively affect metal.
- Do not process tools "by eye." There is an instruction that clearly states the exposure time and concentration of the solution. Do not "soak" the tools overnight; this will not make them cleaner, but will only spoil them. If you are using a dry heat sterilizer, thoroughly rinse the tools from any residual solution, and then dry them completely.
- When choosing a product, pay attention to the packaging – it should indicate that the product is intended for disinfecting manicure tools. Look for the abbreviations CHAS and PAV – they denote the most commonly used active substances in soaking disinfectants. Aldehyde-containing agents, such as Lizoformin 3000 (TM Lizoform) and Korzolex (TM Bode), possess broad antimicrobial activity. These disinfectants can be used for cold sterilization and are recommended for professionals working with problematic nails, podologists, and cosmetologists. For surface treatment, I recommend AHD, Bacillol, and Aerodesin. But remember, soaking tools in them is not allowed!
Here are some general tips for choosing a disinfectant:
- intended purpose for processing metal tools (should be indicated on the packaging);
- must have a full spectrum of antimicrobial activity, i.e., destroy various pathogenic and opportunistic bacteria, viruses, fungi, and spore forms of bacilli;
- non-toxic IV hazard class (low-hazard substance according to GOST 12.1.007-76);
- economical (sufficient solution concentration of about 1%, with a working solution life of at least 7 days);
- certified in Ukraine.
Another important point – sterilization in the presence of the client and what to do if the client insists on re-sterilization in their presence. The master is obliged to sterilize the tools in front of the client if they request it. That is the law. But sterilization takes time from the session, you might say!
There is a solution: to prevent such situations from arising, it is necessary to use sterilization pouches. When the tool is taken out of a sealed pouch in front of the client, there are no questions about its sterility. Some pouches have a sterility indicator that changes color after thermal processing.
These are all the main points related to tool disinfection. As you can see, nothing complicated, just a bit of attentiveness and care is needed.
For clarity, we invite you to watch a video on the sterilization of tools in our laboratory.
Take care of your tools and clients!