NUB Builder Gel Thick Extension Gel No. 03 Milky White 12 ml

The NUB Builder Gel No. 03 is a thick, milky-white material from a three-phase system used for modeling, correction, and strengthening of nails. Its dense consistency is designed for professionals who require complete control during application, from natural lengths to complex elongated shapes. After polymerization, the material becomes hard while maintaining the desired architecture.

Characteristics and Features of NUB Builder Gel No. 03

Features

• applies without running
• adheres precisely during complex modeling
• helps to form the correct architecture
• comfortable to work with long forms
• controlled at every stage

Specifications

1. milky-white
2. thick consistency
3. hard after polymerization
4. three-phase system
5. polymerization in LED lamp for 60 seconds
6. manufacturer: Ukraine
7. jar
8. volume: 12 ml

Who It Is Suitable For

• nail extension and complex modeling professionals
• specialists working with long forms
• masters performing strengthening and correction
• those who value material control during application

How to Use NUB Three-Phase Milky-White Nail Extension Gel

1. Perform a manicure using your preferred method: hardware, combined, or classic.
2. Remove any residue of the remover and thoroughly clean the nail plate.
3. Dehydrate the surface with Clean Prep and dehydrate with Prep Step.
4. Apply a non-acid primer to enhance adhesion.
5. Thinly distribute the base coat or rubber base coat and polymerize in the lamp.
6. Place the main bead and form the architecture.
7. For masters who choose to buy the NUB No. 03 three-phase gel for long forms, it is convenient to build the apex with one bead: the thick texture stays in place without flowing to the side walls.
8. Polymerize for 60 seconds in an LED lamp. If necessary, press the material at the 15-second mark.
9. Remove the sticky layer with NUB Non-Sticky and file.
10. If desired, apply gel polish or create a design.
11. Cover with a moderate layer of top coat and polymerize.
12. File the free edge and moisturize the cuticle with oil.

Composition (INCI):

Storage Conditions: store tightly closed in a dark place, away from direct sunlight, working lamps, and heat sources.

Shelf Life:

The thick modeling gel is chosen by those who work extensively with length: the mass does not flow while the master shapes it, thus reducing the time spent on corrections before polymerization. The milky-white shade provides a natural appearance to the nail and serves as a suitable base for solid color coatings, French manicures, and nail designs.

Frequently Asked Questions about NUB Builder Gel

• How does it differ from Pro Builder Gel of the same brand? It has a medium thickness with a balance of self-leveling and control, and the sticky layer is intense. This line is thicker, applies without running, and has moderate dispersion.
• Is it suitable for strengthening short nails? Yes. The material is applied thinly, with maximum thickness left in the stress zone.
• Can the coating be removed by soaking? No. It is removed by filing with a drill or file.
• Can it heat up in the lamp? The formula is low-temperature, but a thick layer or sensitive plate may cause a thermal response. Step-by-step polymerization with short intervals helps.