NUB Builder Gel Thick Extension Gel No. 07 Rich Pink 30 ml

The NUB Builder Gel No. 07 is a dense pink material from a three-phase system used for modeling, correction, and strengthening of nails. Its thick consistency is designed for professionals who require complete control during application: from natural lengths to complex elongated shapes. After polymerization, the material becomes hard while maintaining the desired architecture.

Characteristics and Features of NUB Builder Gel No. 07

Features

• applies without running
• accurately lays down during complex modeling
• helps to form the correct architecture
• comfortable to work with long forms
• controlled at every stage

Specifications

1. saturated pink
2. thick consistency
3. hard after polymerization
4. three-phase system
5. polymerization in an LED lamp for 60 seconds
6. manufacturer Ukraine
7. jar
8. volume 30 ml

Who It Is Suitable For

• nail extension and complex modeling professionals
• specialists working with long forms
• masters performing strengthening and correction
• those who value material control during application

How to Use NUB Three-Phase Gel for Nail Extension in Saturated Pink

1. Perform a manicure in your usual way: hardware, combined, or classic.
2. Remove any residue of the remover and thoroughly clean the nail plate.
3. Dehydrate the surface with Clean Prep, then dehydrate with Prep Step.
4. Apply a non-acid primer to enhance adhesion.
5. Thinly distribute the base coat or rubber base coat and polymerize in the lamp.
6. Place the main bead and shape the architecture.
7. For professionals who decide to purchase the NUB Builder Gel No. 07 for long forms, it is convenient to build the apex with one bead: the thick texture stays in place without flowing to the sidewalls.
8. Polymerize for 60 seconds in an LED lamp. If necessary, press the material at the 15-second mark.
9. Remove the sticky layer with NUB Non-Sticky and file as needed.
10. If desired, apply gel polish or create a design.
11. Cover with a moderate layer of top coat and polymerize.
12. File the free edge and moisturize the cuticle with oil.

Composition (INCI):

Storage Conditions: store tightly closed in a dark place, away from direct sunlight, working lamps, and heat sources.

Shelf Life:

The dense gel for nail modeling is chosen by those who work a lot with length: the mass does not flow while the master builds the shape, thus reducing the time spent on corrections before polymerization. The saturated pink shade gives a natural look to the nail and serves as a good base for solid color coatings, French, or nail designs.

Frequently Asked Questions about NUB Builder Gel

• What is the difference from Pro Builder Gel of the same brand? It has a medium viscosity with a balance of self-leveling and control, and the sticky layer is intense. This line is thicker, applies without running, and has moderate dispersion.
• Is it suitable for strengthening short nails? Yes. The material is applied thinly, leaving the maximum thickness in the stress zone.
• Can the coating be removed by soaking? No. It is removed by filing with a drill or file.
• Can it heat up in the lamp? The formula is low-temperature, but a thick layer or sensitive plate can produce a thermal response. Step-by-step polymerization in short intervals helps.