Acrylic Gel NUB No. 05 Cold Beige 30 ml

NUB Acryl Gel №05 Beige is a thick modeling material in a cool beige shade that combines the properties of two products. It is used for strengthening, repairing, and extending nails. The mass does not run or self-level, allowing the architecture to remain under the control of the technician. After polymerization, the coating is hard and retains its shape even at length.

Characteristics and Features of NUB Acrylic Gel for Nails №05 Beige

Features

• retains shape during application
• allows for an extension of up to 2 mm in length without forms
• thermoplastic
• no sharp odor
• no burning sensation during polymerization

Specifications

1. cool beige shade
2. thick consistency
3. hard after polymerization
4. moderate sticky layer
5. manufacturer Ukraine
6. tube
7. volume 30 ml

Suitable For

• strengthening natural nails, including thin ones
• repairing the nail plate
• extension on upper forms
• modeling complex shapes and long lengths
• application of French tips

How to Use NUB Acryl Gel №05 Beige

1. Perform a manicure using your preferred technique: hardware, combined, or classic.
2. Remove any residue of the remover and clean the nail plate.
3. Dehydrate the nail after degreasing.
4. Apply a primer to enhance adhesion.
5. Create a thin base layer using Base Coat or Rubber Base Coat, polymerizing for 30 seconds in an LED lamp.
6. Squeeze out a portion of the material. It is advisable to purchase NUB Acryl Gel №05 as it is ready to use and does not require mixing with monomer.
7. Shape the architecture with a brush moistened with Magic Fluid.
8. Polymerize for 60 seconds, and if necessary, press the material at the 15-second mark.
9. Remove the sticky layer and file as needed.
10. If desired, apply gel polish or create a design.
11. Cover with a moderately thick top coat and polymerize for 60 seconds.
12. File the free edge and apply cuticle oil.

Composition (INCI): Acrylates Copolymer, Polymethyl Methacrylate, Polyethylene Terephthalate, Hydroxypropyl Methacrylate, Dimethicone, Hydroxycyclohexyl Phenyl Ketone, Microcrystalline Wax. May contain: CI 77891, CI 77492, CI 77491, CI 73360, CI 77266

Storage Conditions: Store tightly closed in a dry, dark place away from heat sources and UV rays.

Shelf Life:

The cool beige Acrylic Gel for extension NUB №05 is chosen by technicians who value a manageable material: the thick mass stays where it is placed, making it easier to build the architecture without corrections. The cool beige tone is suitable for natural designs and French tips. One tube covers the tasks of strengthening, repairing, and extending – reducing the number of unnecessary jars on the workbench.

Frequently Asked Questions about NUB Acrylic Gel Cool Beige №05

• How to remove the material? By filing – using a drill or file. The remover does not dissolve the coating.
• Why does the material stick to the brush? The brush is not sufficiently moistened with liquid. Dip it in Magic Fluid and blot the excess on a lint-free wipe.
• How does it differ from gel and acrylic? By density: the mass is thick and is shaped with a brush. Unlike acrylic – it works without monomer, powder, or a strong odor. It only hardens in the lamp, so there is no time limit for modeling.
• What can replace Magic Fluid? Poly-gel liquid (slip solution) or 99% isopropyl alcohol. Monomer, acetone, and degreasers with oils are not suitable: they cause cloudiness, bubbles, and delamination. Moisten the brush lightly.