Acrylic gel NUB No. 09 Cashmere beige with shimmer 30 ml

NUB Acryl Gel №09 Cashmere is a thick modeling material in a beige shade with shimmer that combines the properties of two products. It is used for strengthening, repairing, and extending nails. The mass does not run or self-level, allowing the architecture to remain under the control of the technician. After polymerization, the coating is hard and retains its shape even at length.

Characteristics and Features of NUB Acryl Gel №09 Cashmere

Features

• retains shape during application
• allows for an extension of up to 2 mm in length without forms
• thermoplastic
• no sharp odor
• no burning sensation during polymerization

Characteristics

1. beige shade with shimmer
2. thick consistency
3. hard after polymerization
4. moderate sticky layer
5. manufacturer Ukraine
6. tube
7. volume 30 ml

Suitable For

• strengthening natural nails, including thin ones
• repairing the nail plate
• extension on upper forms
• modeling complex shapes and long lengths
• application of French tips

How to Use NUB Acryl Gel №09 Cashmere

1. Perform a manicure using your preferred technique: hardware, combined, or classic.
2. Remove any residue of the remover and clean the nail plate.
3. Dehydrate the nail, then degrease.
4. Apply a primer – it enhances adhesion.
5. Make a thin base layer using Base Coat or Rubber Base Coat, polymerizing for 30 seconds in an LED lamp.
6. Squeeze out a portion of the material. It is advisable to purchase NUB Acryl Gel №09 as it is ready to use and does not require mixing with monomer.
7. Form the architecture with a brush moistened with Magic Fluid.
8. Polymerize for 60 seconds, and if necessary, press the material at the 15-second mark.
9. Remove the sticky layer and file as needed.
10. If desired, apply gel polish or create a design.
11. Apply a top coat of moderate thickness and polymerize for 60 seconds.
12. File the free edge and apply cuticle oil.

Composition (INCI): Acrylates Copolymer, Polymethyl Methacrylate, Polyethylene Terephthalate, Hydroxypropyl Methacrylate, Dimethicone, Hydroxycyclohexyl Phenyl Ketone, Microcrystalline Wax. May contain: CI 77891, CI 77492, CI 77491, CI 73360, CI 77266

Storage Conditions: Store tightly closed in a dry, dark place away from heat sources and UV rays.

Shelf Life:

The beige acrylic gel with shimmer for extensions NUB №09 is chosen by technicians who value a manageable material: the thick mass stays where it is applied, making it easier to build the architecture without corrections. The beige tone with shimmer is suitable for natural designs and French tips. One tube covers the tasks of strengthening, repairing, and extending – reducing the number of unnecessary containers on the work desk.

Frequently Asked Questions about NUB Beige Acrylic Gel with Shimmer №09

• How to remove the material? By filing – using a drill or file. The coating does not dissolve with remover.
• Why does the material stick to the brush? The brush is not sufficiently moistened with liquid. Dip it in Magic Fluid and blot the excess on a lint-free wipe.
• How does it differ from gel and acrylic? By density: the mass is thick and is shaped with a brush. Unlike acrylic, it works without monomer, powder, or a sharp odor. It only hardens in the lamp, so there is no time limit for modeling.
• What can replace Magic Fluid? Poly gel liquid (slip solution) or 99% isopropyl alcohol. Monomer, acetone, and degreasers with oils are not suitable as they cause cloudiness, bubbles, and delamination. Moisten the brush lightly.